Hiring the best solar companies in Singapore can be really helpful. Now your fully functional solar system is ready and is ready to operate by checking its output of 9 amps. But don’t worry, there are plenty of tutorials out there in video and text form to access.

Step Guide

• Buy Solar Cells from an online portal: It is perhaps the first step towards building your system. Now there are lots of solar cell types that you have the option to choose from. There are three Chinese ones with good performance, good results but don’t offer any guarantees. Then there are the Japanese ones with good efficiency, reasonable price and offer Japanese work guarantee. Hence choose wisely depending on your budget, and a general rule of thumb is that each cell shouldn’t be selling for more than $1.3 per watt.
• Tools and Equipment: After receiving these cells, it’s time to look out for tools and other necessary equipment. You would require to have tools like soldering iron, solder paste, and solder to help remove the wires’ grease. Also a saw, protective glasses, wooden board, pencil, and ruler. Also, you need to indispensable a multimeter that can help measure the current and voltage amount that passes through it.
• Planning of the Solar panel system: It’s simple, and you need to be careful while handling this fragile and very delicate equipment. Just place the square summary solar cells onto the wooden board and, using a pencil, draw a separating line accurately. Your half work has been accomplished.
• Wiring of the Solar panel system: After the physical arrangement is sorted, you need to solder the wires to the solar cells and also solder them to each other. Link the cells in series,which will help you increase the voltage to a minimum of 12V with as many cells. Next, stick the cells on the board in a frame that can help you remove and replace the defective ones.

Make the connection buses and have a parallel connection and increase the amperage.